« previous next »
Pages: [1]   Go Down

Author Topic: MCI 7 Power steering  (Read 1585 times)

Offline Tenor

  • Hero Member
  • *****
  • Posts: 1005
    • Three Men and a Tenor
MCI 7 Power steering
« on: June 27, 2012, 02:11:23 PM »
On the reservoir for my power steering, there is a lid.  In the lid is a small threaded fitting, 1/8 pipe I think.  It has no plug.  Should it?

Thanks!

Glenn
Logged
Glenn Williams
Lansing, MI
www.threemenandatenor.com
1968 MCI 7 Ser. No. 7476 Unit No. 10056
8v71
4 speed Spicer

Offline Stormcloud

  • FMCA#407220
  • Hero Member
  • *****
  • Posts: 591
Re: MCI 7 Power steering
« Reply #1 on: June 27, 2012, 04:03:47 PM »
No plug. It is the vent. Mine was also missing, so I put some light foam mesh over it and ty-wrapped it.
Logged
Mark Morgan  
1972 MCI-7 'Papabus'
8v71N MT654 Automatic
Brandon, Manitoba, Canada in summer
somewhere near Yuma, Arizona in winter(but not 2020)

Offline Tenor

  • Hero Member
  • *****
  • Posts: 1005
    • Three Men and a Tenor
Re: MCI 7 Power steering
« Reply #2 on: June 27, 2012, 05:23:45 PM »
That's what I thought Stormcloud!  I used a hose fitting and a short bit of hose in a loop.
Logged
Glenn Williams
Lansing, MI
www.threemenandatenor.com
1968 MCI 7 Ser. No. 7476 Unit No. 10056
8v71
4 speed Spicer
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal