BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Bosshosssport96 on July 25, 2006, 09:13:31 PM

Title: Curious
Post by: Bosshosssport96 on July 25, 2006, 09:13:31 PM

A few days ago,I received my 8V92T,still bolted on was the clutch,pressure plate and throw out bearing,will these items work on a 8V71????Frank 4501-082

Title: Re: Curious
Post by: TomC on July 26, 2006, 09:58:43 AM

I believe the bolt pattern is different.

Title: Re: Curious
Post by: Happycampersrus on July 26, 2006, 12:38:46 PM

The flywheel end of the 8V92 crank is larger than the 8V71.  :-\. The flywheels will NOT interchange. You can try and see if you can use the parts depending on which 8V71 flywheel you have. There are a couple different size clutches used and you might just have a match on the bolt pattern on the pressure plate.

Dale

Title: Re: Curious
Post by: Bosshosssport96 on July 26, 2006, 06:19:40 PM

Thanks for the responses.........Frank