BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Eagle Andy on December 25, 2009, 01:00:37 PM

Title: HT 740 Allision ?
Post by: Eagle Andy on December 25, 2009, 01:00:37 PM

Merry Christmas Fella's  I was wondering if anyone has a blowned up picture of the area on a HT 740 that can show me the pin that I have to be careful of when installing my Air modulator for my air throttle. I have never done this before and I don't want to push it into the pan . I looked at allision last nite but no luck with out paying for the privlage . Anyway thought I would ask . Thanks  Andy

Title: Re: HT 740 Allision ?
Post by: luvrbus on December 25, 2009, 01:32:10 PM

Andy, drain about 2 gals of fluid first thing then a trick I use is a strong magnet I hold it to modulator and it will hold the steel pin in the modulator.
The problem most have with the pin is changing the modulator without draining the oil to a level below it, call me at home if you have any questions


good luck

Title: Re: HT 740 Allision ?
Post by: Eagle Andy on December 25, 2009, 01:53:46 PM

Thanks Clifford , I'll do that.