BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 1960eagle on September 25, 2011, 09:16:55 AM
-
just bought and stuck now on way back home.8v92 oil fill tube wont take oil and turbo return cant drain back.any ideas?
-
many good idea's the guys should be on soon.
Lonnie
-
not enough info here to vague. does your dip stick show you need oil? your turbo return is a non restricted free flow back to pan. only thing there that can cause problem is kinked line, plugged line or overfull oil pan giving it no place to go. more information on engine symptoms-smoke--what color--shut down? did you let it sit 20 minutes before checking oil level stopped?
-
You need to clarify this one where is the turbo located if on the top of the blower it drains through the blower,the turbo is pressure feed if the return is stopped up it blows the seals,do you check the engine oil through the fill tube or does it have a different stick photos would be nice to help I see no reason for a fill tube to stop up unless a rag , the seal or lid from a jug of oil some how got in there a oil jug lid is just right to plug the 1 in hole but the turbo should be blowing oil out of the tube if it is tied in there
If you are close to Miles City I have a friend there that may could help he has a 8V92 his Eagle
good luck
-
Where are you at?
-
ok got it fixed p.o had rag in oil fill tube.had to pull fill tube to remove.
thanks for input from all