BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: john frehlich on July 20, 2023, 10:49:00 PM

Title: mci7 parts on mci 5 b
Post by: john frehlich on July 20, 2023, 10:49:00 PM

came across a 1970 mci7 parts bus will the
rads
mitre box
blowers
fit my 1977 mci5b

Title: Re: mci7 parts on mci 5 b
Post by: mccarlk on July 23, 2023, 04:45:55 PM

Not sure about your question, but may i ask where the parts bus is , im looking for the front cap

Title: Re: mci7 parts on mci 5 b
Post by: ol713 on July 24, 2023, 11:24:11 AM

Quote from: mccarlk on July 23, 2023, 04:45:55 PM

Not sure about your question, but may i ask where the parts bus is , im looking for the front cap

       Hi
           and I could use a couple of baggage doors.
                                               ;D

Title: Re: mci7 parts on mci 5 b
Post by: RJ on July 25, 2023, 09:39:25 PM

John -

Not sure if the rads will fit (get out the tape measure!!), but there's a good possibility that the miter box and squirrel cage blowers will.

Also suggest that you open up the blower discharge area to roughly 2x the original size (without cutting the supporting brace) to allow more airflow out of the blower compartment.

FWIW & HTH. . .  ;)

RJ

Title: Re: mci7 parts on mci 5 b
Post by: john frehlich on July 29, 2023, 07:42:12 AM

The bus is a static display so nothing exterior is available motor trans long gone items i found of use
starter
clutch and basket for 4 speed
blowers and mitre box
ac equipment
powers steering components
under dash blowers etc
misc solenoids electrical   
i am in bc these not yet for sale just things i found
John