BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: plyons on January 28, 2025, 12:05:54 PM
-
Good afternoon bus folks!,
I believe I have a resistor which has failed in my rear taillight module. I have power going into the resistor, but not out. Picture of the module is shown below.
I'm having trouble locating a replacement as I'm not finding that identification number on the Internet.
Can someone with greater knowledge of what is required please advise? OK, I have very little knowledge here. :)
The characters stamped on the resistor are : 25W50RF
It is inline to the two LED brake light "squares". All other brake lights work, and tow vehicle brake lights work as well.
Thank you all!, Phil
-
Best guess, it's a 50 ohm 25 watt resistor, borne out by a google search. Plenty of good wirewound candidates out there.
Jim
-
Thanks very much Jim. With my lack of experience I thought I'd better check my "thoughts".
With best regards, Phil