BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: grantgoold on August 28, 2013, 07:30:52 PM
-
I am looking for some help on the front door seals for my MCI 9. The parts book is no good for this. I need both the flat seal that sits in a track and then the second seal that is behind it towards the interior. Both of these seals appear to be in the door pocket and are not attached to the actual door. Anybody replaced theirs recently?
Any help would be much appreciated.
Regards,
Grant
-
Grant -
Perhaps Luke can assist you: 1-888-262-2434
FWIW & HTH. . .
;)
-
Good idea! Thanks RJ
-
Grant
Luke got mine for me. Now I need to install I have had them about one year.
LOL
John
-
John, what kind of money did you spend?
Grant
-
Make sure you clean out the tracks so the new seals will set in good.
Luke got them for me about 2 years ago.
Frank
-
Grant
I can't remember. I got window rubber for the front windshields, bushings for engine cooling blower and a few turn buckles. Seems like I spent three or four hundred.
John
-
John, thanks I was able to get MCI online to help and they gave me the part numbers and an explanation of the process. Down side, I need to order $250.00 or more in order not to get hit with a 50% increase in cost for shipping and handling. >:(
So, I will contact Luke or wait until I need some more items.
Thanks
Grant