BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: akroyaleagle on April 02, 2006, 03:24:58 PM

Title: Learning to use the New Board
Post by: akroyaleagle on April 02, 2006, 03:24:58 PM
This is a GREAT format! It is now easy to post pictures of things we have done in reply to questions.
I LIKE IT!

There were some questions about electrical layouts a while back. This is much easier.

(http://)
Title: Re: Here's the other side
Post by: akroyaleagle on April 02, 2006, 03:26:16 PM
(http://)
Title: Re: Learning to use the New Board
Post by: Dallas on April 02, 2006, 03:33:11 PM
I wish my electrical looked that neat.
Do ya spose it matters if I hook the black wire and the copper wire together before I plug it in?
Also, what's the Zip tie for in the second picture?
Dallas
Title: Re: Learning to use the New Board
Post by: Nick Badame Refrig/ACC on April 02, 2006, 05:43:59 PM
I wish my electrical looked that neat.
Do ya spose it matters if I hook the black wire and the copper wire together before I plug it in?
Also, what's the Zip tie for in the second picture?
Dallas

Dallas,

Black and copper colors go good together, Hook em up!
Title: Re: Learning to use the New Board
Post by: Dallas on April 02, 2006, 05:50:41 PM
But Nick, what do I do with those extra red and blue ones???
Title: Re: Learning to use the New Board
Post by: Nick Badame Refrig/ACC on April 02, 2006, 07:17:48 PM
Dallas,

Tape them together,  Bend them out of the way, and save them for future use like, when the black and copper ones burn out!

Nick-
Title: Re: Learning to use the New Board
Post by: Kristinsgrandpa on April 02, 2006, 08:52:41 PM
Do what ever you like as long as you're fused.

I once dated an elctricians daughter because she couldn't re-fuse.

Ed
Title: Re: What's the zip tie for?
Post by: akroyaleagle on April 03, 2006, 05:57:01 PM
The one at the top is holding the cable for the remote satellite dish.
The one at the bottom is holding the plug for the electrical voltage protector