June 23, 2018, 07:08:48 PM

Author Topic: Slide Tray Idea  (Read 6124 times)

Dallas

  • Guest
Re: Slide Tray Idea
« Reply #15 on: July 14, 2006, 06:19:32 PM »
He has the distribution center right up the street. :P  Is it on the Octoberfest schedule?



Nope, Not on the schedule, but we can always make a side trip if we need to!

By the way, the only HF items I see are the plastic welder and the red triangle magnet.

I think that's about the only thing I've bought from HF in a long time!

Dallas

Offline Hartley

  • Hero Member
  • *****
  • Posts: 1217
Re: Slide Tray Idea
« Reply #16 on: July 14, 2006, 07:04:16 PM »
Plastic Welder
Chipping Hammer/Brush? ( Looks chinese to me..)

I missed the magnet thingy...
Never take a knife to a gunfight!

Dallas

  • Guest
Re: Slide Tray Idea
« Reply #17 on: July 15, 2006, 12:06:59 AM »
Plastic Welder
Chipping Hammer/Brush? ( Looks chinese to me..)

I missed the magnet thingy...


Yeah, the slag hammer may be from HF... I've had it so long I don't remember where I got it. I've had 4 or 5 good ones and lose them but, this one keeps hanging around.

Dallas

Offline Le Mirage

  • Full Member
  • ***
  • Posts: 185
  • Le Mirage XL 1987
Re: Slide Tray Idea
« Reply #18 on: January 13, 2010, 08:36:58 AM »
Wouah! Good Idea...
Gaƫtan & Manon (french canadian)
Prevost, Le Mirage XL, 1987
Quebec, Canada

http://latchodromquebec.blogspot.com/2010/05/la-fin-du-voyage.html


Offline oldmansax

  • Hero Member
  • *****
  • Posts: 1143
Re: Slide Tray Idea
« Reply #19 on: January 13, 2010, 09:44:39 AM »
Outstanding idea!

TOM

Offline Len Silva

  • Hero Member
  • *****
  • Posts: 4086
  • Angle Parked in a Parallel Universe
    • Leonard Studio
Re: Slide Tray Idea
« Reply #20 on: January 13, 2010, 12:29:53 PM »
Looks good.

I been planning a similar concept for my stair cover. I bought a bunch of tiny skate wheels from a surplus place. I'm going to motorize it with a cheapo 12v cordless drill.

I'm planning on using channel iron on the bottom, and then attach the rear wheels to the tray, and the front wheels to the rack, and have the tray roll on the front wheels. The rear wheels will support the back and I'll get no binding of the tray metal on the channel iron metal as the weight comes out. I'm hoping to do it with 4 wheels.


Don't know how I missed this topic back in July.  Great idea Gumpy but I think electric window motors might be more robust.

Hand Made Gifts

Ignorance is only bliss to the ignorant.

Offline BG6

  • Hero Member
  • *****
  • Posts: 642
Re: Slide Tray Idea
« Reply #21 on: January 13, 2010, 12:37:08 PM »
Don't know how I missed this topic back in July..

Because it was the July THREE AND A HALF YEARS AGO!

Holy Thread Resurrection, Batman!

:D

Offline Just Dallas

  • Bus Conversion Stuff on a Budget
  • Hero Member
  • *****
  • Posts: 846
    • BCS
Re: Slide Tray Idea
« Reply #22 on: January 13, 2010, 01:41:17 PM »
Removed
« Last Edit: July 15, 2010, 01:51:13 PM by Now Just Dallas »
I'm just an old chunk of coal... but I'm gonna be a diamond someday.

Offline gumpy

  • Some Assembly Required
  • Hero Member
  • *****
  • Posts: 4103
  • Slightly modified 1982 MC9
    • bus.gumpydog.com
Re: Slide Tray Idea
« Reply #23 on: January 13, 2010, 01:48:18 PM »
Yup, and I still haven't built my stair cover   :-[
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"

Offline Nellie Wilson

  • Full Member
  • ***
  • Posts: 243
Re: Slide Tray Idea
« Reply #24 on: January 13, 2010, 04:10:49 PM »
Dallas -
That is waaay to smart! I've been drooling for some bay slideouts but didn't hve a clue where to start. Whack a couple of those together for me... I'll give you %100 over cost, no questions asked.  ;D

Nellie Wilson
Had to change a tire... >:(  got to put it on backward... :-\  still trying to fix it on photoshop... ??? ::) ???