June 23, 2018, 04:37:34 PM

Author Topic: What are best practices on hydronic heat and domestic hot water?  (Read 4124 times)

Offline belfert

  • Hero Member
  • *****
  • Posts: 6023
Re: What are best practices on hydronic heat and domestic hot water?
« Reply #15 on: July 09, 2009, 01:25:18 AM »
I really don't want to do is mess with the generator.  The generator is in fairly tight quarters due to enclosure it came with for one thing.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Offline donnreeves

  • Jr. Member
  • **
  • Posts: 72
Re: What are best practices on hydronic heat and domestic hot water?
« Reply #16 on: July 09, 2009, 09:28:07 AM »
I also have a Seaward 11 gal water heater. I don't know why It takes so long to make hot water using the 45,000btu Pro-Heat and it's internal heat exchanger. I just assumed the exchanger is very small. I don't recall the btu rating of the flat plate exchanger, but it is about 6"x10'x2" thick. Sure does work.   Donn