Author Topic: Parts need for the 8v92 colling fan  (Read 1579 times)

Offline zxzx9r

  • Newbie
  • *
  • Posts: 11
Parts need for the 8v92 colling fan
« on: August 24, 2009, 11:54:53 AM »
Does anyone have any parts for the 8v92 cooling fan? I need all the brackets and rubber mounts that hold the fan down. Bolt, hardware, angless, rubbers, ect. I have the main supports and fan and the gearbox, but I trash the rest of it. I installed a hydraulic cooling fan and it did not work.

Offline LUKE at US COACH

  • Full Member
  • ***
  • Posts: 120
Re: Parts need for the 8v92 colling fan
« Reply #1 on: August 24, 2009, 12:45:11 PM »
Hi zxzx9r & Folks:

Give us a call, toll free at; 1-888-262-2434, and we should be able to get your system back together.

I Hope this HELPS!!!

Happy & SAFE!!! Busin' to All.

LUKE at US COACH

Offline RickB

  • Hero Member
  • *****
  • Posts: 1178
  • 81 MCI 9 smooth side 8V71 Allison 754
Re: Parts need for the 8v92 colling fan
« Reply #2 on: August 24, 2009, 12:58:03 PM »
Mohawk sells the new style yellow mounting bushings. All the hardware I got at Hardware Hank. Before you put it back in you might want to order a rebuild kit for the blower gearbox from Luke or Mohawk and don't forget the speedy sleeves. If you get them remember to heat them in your oven before installation.

New brackets may be spendy if they are call ABC in Faribault MN ask for Burt. He sells their used parts and he has a number of gearbox assemblies still in parts coaches.

Come to think of it I may have my old saddle at home. I'll look when I get home

I will drive my Detroit hard... I will drive my Detroit hard.