« previous next »
Pages: [1]   Go Down

Author Topic: electrical parts source needed  (Read 1218 times)

Offline Cary and Don

  • Hero Member
  • *****
  • Posts: 799
electrical parts source needed
« on: September 27, 2009, 04:01:35 PM »
Hi,

We are looking for a source to get the buss bars with screw studs that use nuts.  We can find those little ones all over the place, but need the heavy duty ones to hook our batteries to.

Don and Cary
GMC4107
Neoplan AN340
Logged
1973 05 Eagle
Neoplan AN340

Offline gumpy

  • Some Assembly Required
  • Hero Member
  • *****
  • Posts: 4120
  • Slightly modified 1982 MC9
    • bus.gumpydog.com
Re: electrical parts source needed
« Reply #1 on: September 27, 2009, 04:45:03 PM »
Waytekwire.com
Logged
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"

Offline gus

  • Hero Member
  • *****
  • Posts: 3632
Re: electrical parts source needed
« Reply #2 on: September 27, 2009, 06:28:43 PM »
You can make one with medium heavy copper metal and bolts/nuts.
Logged
PD4107-152
PD4104-1274
Ash Flat, AR

Offline rv_safetyman

  • Hero Member
  • *****
  • Posts: 2199
  • Jim Shepherd
    • Bus Project Details
Re: electrical parts source needed
« Reply #3 on: September 27, 2009, 06:51:26 PM »
I use Del City for a lot of my stuff.

Take a look at:  http://www.delcity.net/store/Stud-Type-!-Panel-Mount-Junction-Block/p_71705.a_1

It is a big unit with a half inch stud.

Jim
Logged
Jim Shepherd
Evergreen, CO
’85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal