June 25, 2018, 05:18:29 AM

Author Topic: Located Several AutoShifts and Cummins ISMs  (Read 1846 times)

Offline rv_safetyman

  • Hero Member
  • *****
  • Posts: 2199
  • Jim Shepherd
    • Bus Project Details
Located Several AutoShifts and Cummins ISMs
« on: July 20, 2006, 09:00:14 PM »
I am still on my way back from BusN USA.

I got to Ogden a little early (pick up Pat tonight from her convention) and decided to go to a truck wrecking yard to look for a part.  Found a truck with an AutoShift and had to ask what he wanted for it.  He said $3500 for the complete package plus some sort of core (HT740 was OK with him).  I think that is a pretty good price.

Now, for the good news (and just what you engine conversion wantabes need)!!

He has 22 trucks coming in with ISM 400 HP/AutoShift combinations!!  As most of you know, the ISM can go in an Eagle (and perhaps other buses) with no need to raise the bed.  These would make a heck of a conversion.  He said that if the person wants it all, he will sell the truck less the rear ends.  That would give you most everything you need for the conversion.  Didn’t ask price.

Rocky Mountain Truck Parts
Ogden, UT
801-392-1060
Toll Free:  877-393-1060
Ask for Shan

They have a website:  http://www.rockymountaintruckparts.com/
Jim Shepherd
Evergreen, CO
’85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/

Offline ceieio

  • MCI 7 DD 8V71, HT740
  • Full Member
  • ***
  • Posts: 114
  • 1973 MCI 7
Re: Located Several AutoShifts and Cummins ISMs
« Reply #1 on: July 23, 2006, 07:21:22 PM »
That sounds interesting...  I have so much else to do on my bus I will probably holds off... I am upto 15K on an out of frame, so I can't justify it on those grounds... I just want to zap up the hills faster!  Once a hot rodder, always a hot rodder. :)

Craig - MC7 Oregon
Craig MC7 - Oregon USA