Looks Like We may have some Excitement Soon!

[Just Dallas]

Removed

[Dreamscape]

Wonder how many tires it takes to move 2 million pounds of steel, plus the weight of the equipment? WOW!

Neat video!

[John316]

As soon as I get a good conection, I will watch the video.

Man, Dallas, that thing is huge! I have never seen something that big being transported! I wonder what they pull it with? Are they pushing too?

Thanks for posting that.

God bless,

John

[luvrbus]

Dallas can you get a photo of the truck with the owners name I am curious to see if that is one Davenports rigs , over a million pounds that takes some rubber on the ground and a lot of steel.
I know he has the equipment to do it, they were moving a vessel in La that was a million pounds

thats ok Dallas I see it is Mommoet from Rosharon the old Westhimer Co the cranes are going to be a sight to see lifting that load

good luck

[kyle4501]

looks like 8 tires per axle
18 axles in front
18 axles in rear
= 288 tires
& that's just the trailer!


& I thought moving a derelict relic of a bus was expen$ive 

[gumpy]

& I thought moving a derelict relic of a bus was expen$ive 

Kyle's drooling over that trailer.  He's envisioning ALL his buses on it at one time! 

[belfert]

I was reading the comments at the KBTX website.  What a bunch of whiners.  They are all complaining about roads being closed to move this thing.

There are many of them who don't understand that the weight on each wheel is the same or less than a standard semi.  A bunch of folks are also complaining that all the roads will be destroyed by the weight.  They don't understand that the route has been surveyed and triple checked for any issues.  The moving company isn't leaving anything to chance.

[muddog16]

Not sure where that generator was made.....they use to assemble them on site........there went a ton of manhours!  I watch huge sections of duct work for power plants being moved up the river, they assemble some of them in LA and others even further south.........out of the country!  I'm sure we could use the jobs!

[luvrbus]

Belfert, in the State of Texas for that size load the State will send their own engineer out to mark the route for the haul and you better not change it.
I was surprised they routed it on the FM roads (farm to market)

good luck

[tomhamrick]

We had the same thing here just last month.  Had to haul it from a ship in Savannah, GA to Cliffside, NC. It took them 2 months to come the 2 lane highways and could only travel at night since it was so wide they had to close the road. They had a crew going ahead of them to build a metal parking spot on the side of the road at each stop so it would not sink in the ground. This was just the stator or windings part of the generator and the reason it could not be built on site. It was mated with the rest of the generator on site. Trying to remember from the pictures but it had at least one pull truck and one pusher, maybe more. I was told the extra trucks where as more for slowing it down as for getting it rolling.
Tom Hamrick

[tomhamrick]

Sorry double post.   Stupid computer.......or operator!   

Tom Hamrick

[JackConrad]

We saw a similar rig last fall along side a 2 lane state highway in SC. It was parked for the day on the steel mats, waiting for night to continue its journey.  Unfortunately, it was raining and I did not have our camera with us.  Jack

[luvrbus]

Fwiw, that is a Martin,Merry and Reid generator built in Baton Rouge La I installed a few but none that BIG


good luck

[Just Dallas]

Removed

[belfert]

Belfert, in the State of Texas for that size load the State will send their own engineer out to mark the route for the haul and you better not change it.
I was surprised they routed it on the FM roads (farm to market)

I would still bet the moving company sent their own guys out to survey the route and check for any potential problems.  The moving company probably wouldn't get any more business if they screw up something this big.

The infoormation I saw on the KBTX website is that the generator was made in Japan.