Author Topic: PD 4107 Wiring Diagrams  (Read 6396 times)

Offline sdc53

  • Full Member
  • ***
  • Posts: 112
Re: PD 4107 Wiring Diagrams
« Reply #15 on: July 11, 2013, 11:00:41 PM »
Gus, check your private messages.

I'm also looking for 8v71 overhaul, maintenance, and parts manuals.  Anything with diagrams, specifications, instructions, etc that can enlighten me.


Scott
'69 4107
Gladstone, OR
Scott
Gladstone, OR
1969 PD4107

Offline tekebird

  • Hero Member
  • *****
  • Posts: 2264
Re: PD 4107 Wiring Diagrams
« Reply #16 on: July 12, 2013, 07:17:44 PM »
I have a hard copy if someone is interested

Online luvrbus

  • Hero Member
  • *****
  • Posts: 19569
Re: PD 4107 Wiring Diagrams
« Reply #17 on: July 13, 2013, 05:42:22 AM »
The V71 service manual has a more in it than the V71 highway service manual fwiw when buying a manual,the highway manual has plenty for a bus owner for you guys that wanted one from me I need a address for shipping

Parts manuals are hard to come by for the 8v71 but PC Industries has the parts manuals you can download for free they have the best web site on the web for the parts breakdown
« Last Edit: July 13, 2013, 05:46:32 AM by luvrbus »
Life is short drink the good wine first

Offline tekebird

  • Hero Member
  • *****
  • Posts: 2264
Re: PD 4107 Wiring Diagrams
« Reply #18 on: July 13, 2013, 11:06:46 AM »
Scott, I have the parts book as well

Offline sdc53

  • Full Member
  • ***
  • Posts: 112
Re: PD 4107 Wiring Diagrams
« Reply #19 on: July 14, 2013, 12:32:05 AM »
I couldn't find the link to the free download of those parts manuals, looks like they are charging for them now.
http://www.powerlinecomponents.com/InventoryCatalog/index.htm?listingcategory=6

Still looking for someone willing to upload the 4107 or 8v71 manuals for me... I can PM a helpful volunteer a link to my cloud drive if you are willing.
Scott
Gladstone, OR
1969 PD4107

Offline Russell Kuck

  • Newbie
  • *
  • Posts: 15
  • THE BUS: 4107 Kuck's Layton Utah
Re: PD 4107 Wiring Diagrams
« Reply #20 on: May 26, 2018, 12:20:39 PM »
Just became a member.... Yes a NEW-BEEEEE.

Been working on a 1967 GM 4107 for the passed 15 years. It's ready for the road, register, licensed and insured. But have a few problems keeping me back from the open road (well it's first short trip, hope it's not too short (due to a break down).

Looking for PD 4107 Wiring Diagrams. Can any point me in the right direction for, download site, PDF or Cloud drive?

1. Trying to find the Brake light switch (I have no brake lights) ?
2. Having a electrical short problem, on one wire next inside the drive left side connection, relay or control box (call it what you wish). It keeps tripping the thermal circuit break so I had to disconnect it for now. Need to see what it goes to.
3. Emergency flasher aren't working ether.

Other then that it's been around the neighborhood and to the fuel station for some diesel.

Any help on fulfilling my fathers dream would be greatly appreciated.

Thank you from Layton Utah........
« Last Edit: May 26, 2018, 12:42:14 PM by corkuck »

Offline chessie4905

  • Hero Member
  • *****
  • Posts: 2850
Re: PD 4107 Wiring Diagrams
« Reply #21 on: May 26, 2018, 06:39:51 PM »
the flashers are located behind panel on right of entrance steps. open panel... flashers are attached on dash support on the left side.
GMC h8h 649#028 (4905)
Pennsylvania-central

Offline chessie4905

  • Hero Member
  • *****
  • Posts: 2850
Re: PD 4107 Wiring Diagrams
« Reply #22 on: May 26, 2018, 06:42:35 PM »
if you dont have any luck on manuals, try here.

http://www.coachinfo.com/Coach_Manuals/GMC/GMC-PD4905.html
GMC h8h 649#028 (4905)
Pennsylvania-central

Offline Russell Kuck

  • Newbie
  • *
  • Posts: 15
  • THE BUS: 4107 Kuck's Layton Utah
Re: PD 4107 Wiring Diagrams
« Reply #23 on: May 28, 2018, 07:20:04 PM »
Thank you. I found the 4 Flashers (in that compartment) were you had said earlier, when fixing the Left Blinkers. But the emergency "flasher"? It's not a flasher problem in this case. It's something deeper then the flasher(s) :-\.

Thank you for the lead on the wiring prints/diagram. A good forum member is hooking me up (in the Mail). Bill Gerrie at retiredbusnut@yahoo.com.

Thank you so much.

WOW, This BUS group has a lot of great people.

/rk