June 23, 2018, 06:04:11 AM

Author Topic: update on injector timing  (Read 1381 times)

Offline skihor

  • Sr. Member
  • ****
  • Posts: 343
update on injector timing
« on: July 06, 2011, 03:18:03 AM »
Got outside after work today and managed to pull off the cold side of the turbo. Inside the "horn" it is
 stamped.  (.95)  A/R of the hot side is still unknown. Does this help to recommend an injector timing figure ?


Thanks for all the help guys...

Don & Sheila

Offline rv_safetyman

  • Hero Member
  • *****
  • Posts: 2199
  • Jim Shepherd
    • Bus Project Details
Re: update on injector timing
« Reply #1 on: July 08, 2011, 04:09:36 PM »
I thought I would bump this to the first page to see if we can get Don some help here.

Jim
Jim Shepherd
Evergreen, CO
’85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 19420
Re: update on injector timing
« Reply #2 on: July 08, 2011, 04:38:43 PM »
Jim, this is hard to try and help with not knowing the way he is setup the model from the turbo would help along hot housing A/R and knowing if he has a bypass blower or not and he needs to check the air supply most of those 6v92 stuck in the 8v71 place I find they leave the 900 cfm air filter not enough for a turbo 6v92 with 9g90's.
He needs to go back to dealer and tell them to re-time  the injectors that it has to much smoke and running hot now they know how to do it and he could have a bad set of injectors even the one they installed could be bad happens all the time with rebuilt injectors so bad lately I order 8 for 6v92 lol

good luck
Life is short drink the good wine first

Offline skihor

  • Sr. Member
  • ****
  • Posts: 343
Re: update on injector timing
« Reply #3 on: July 08, 2011, 05:50:58 PM »
I think I have this one under control. Per Don Fairchild I will have the injector timing set @ 1.460, also I'm going to install a fuel modulator. Just happen to have one on a spare engine that I bought.

Thanks guys,

Don

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 19420
Re: update on injector timing
« Reply #4 on: July 08, 2011, 06:45:56 PM »
Keep us informed how that works for you getting out of the gate

good luck
Life is short drink the good wine first