June 23, 2018, 06:46:22 AM

Author Topic: Windshield Washer  (Read 1229 times)

Offline qayqayt

  • Full Member
  • ***
  • Posts: 117
Windshield Washer
« on: May 31, 2012, 01:02:44 AM »
The spray nozzle for our windshield washer looks like it's been broken off.  Do these nozzles screw in and out or is the assembly all one piece?  We have a GM PD-4108.

Vancouver BC
GM PD-4108

Offline Slow Rider

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 670
Re: Windshield Washer
« Reply #1 on: June 09, 2012, 05:33:53 PM »
The MCI has landed..... We are home.
Dale City Va.  Just a southern suburb of DC
Yes I am a BUSNUT
1976 MCI MC8

Offline roadrunnertex

  • Hero Member
  • *****
  • Posts: 551
Re: Windshield Washer
« Reply #2 on: June 10, 2012, 12:40:46 AM »
If it's like my 4905 two nozzles are one piece and are different for left and right.
The nozzles are pressed into piece that sticks out that you see in front.
Also the nozzles are threaded and can be removed by removing a nut using a 9/16" box end wrench.
The hose slips on the back of each nozzle.