Author Topic: Does anyone make totally custom plastic tanks?  (Read 9821 times)

Offline Dlsnow

  • dave
  • Full Member
  • ***
  • Posts: 224
  • dave
Re: Does anyone make totally custom plastic tanks?
« Reply #30 on: October 14, 2012, 09:03:02 PM »
again - just my .02 http://www.trioniccorp.com/ really does a good job and actually manufacturers the product -
-they will spinweld your fittings of whatever (NPT) size and location you desire at no extra charge
mine dont leak and even when we fill the fresh tank and it is overflowing it doesnt bow or flex
here is a pic of the tight fit we got for our mci7

I know they manufacturer them as I picked mine up from their factory in WI - saw them actually making tanks
1972 MCI7 8v71 converted - 1kw solar on roof

Offline belfert

  • Hero Member
  • *****
  • Posts: 6029
Re: Does anyone make totally custom plastic tanks?
« Reply #31 on: October 15, 2012, 05:41:43 AM »
I haven't had a chance to do anything with calling any vendors or anything yet.  This will be a winter project.  I may even make my own tank.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Offline grayhound

  • Newbie
  • *
  • Posts: 17
Re: Does anyone make totally custom plastic tanks?
« Reply #32 on: October 15, 2012, 10:16:18 AM »
I used Dura cast in Fl. 2 tanks a white one 125 gal for water. and a Blue one for black gray. This was for my 102A3 6 years and good 1800 6834116
86 102A3 50S B500

Offline eagle19952

  • Hero Member
  • *****
  • Posts: 3813
Donald PH
1978 Model 05 Eagle w/Torsilastic Suspension,8V71 N, DD, Allison on 24.5's 12kw Kubota.

Offline Eagle

  • Sr. Member
  • ****
  • Posts: 332
  • 1985 Eagle
Re: Does anyone make totally custom plastic tanks?
« Reply #34 on: October 16, 2012, 05:57:17 AM »

www.duracast.com/products/tanks/

Brian try the above URL they can make anything that you may need.

JCB