Author Topic: invertor  (Read 1490 times)

Offline busing704

  • Newbie
  • *
  • Posts: 44
« on: December 25, 2012, 12:40:28 PM »
I think I have burned out my Invertor when I shut down my gen.and over amped it. It is a DR3624 and I am looking to repair of replaced. But I would really like to repair. If you know a place please let me know. Thanks Jerry Right now we are in Reno Nv. and going to Quartsite Az
« Last Edit: December 25, 2012, 03:39:50 PM by busing704 »

Offline Dave5Cs

  • Hero Member
  • *****
  • Posts: 3387
  • 1979 MCI MC5Cs 6V-71 644MT Allison, Roseville, CA
Re: invertor
« Reply #1 on: December 25, 2012, 01:09:26 PM »
Jerry you might put where you are from so people close to you can give you some idea in your area where you may find help, State or somewhere close to where you are.

Dave5Cs ;D
 1998 Jeep TJ (PFTOED)
 Congressmen should wear uniforms,
 like NASCAR drivers, so we could
 identify their corporate sponsors

Offline pvcces

  • Hero Member
  • *****
  • Posts: 803
Re: invertor
« Reply #2 on: December 25, 2012, 11:14:32 PM »
Jerry, those are supposed to be protected for overloading and short circuiting. I realize that it might have failed, but I would do some checking before it was written off.

Northern Arizona Wind and Sun might be some help. They're in Flagstaff. I'm sure there are many others.

If it was me, I would try to make sure yours is damaged. If I wanted to replace it, I would look on eBay, but be very careful to read all of the terms before making a deal, and I would avoid buying from anyone that didn't have 99% or better feedback.

Good luck finding out what to do.

Tom Caffrey
Tom Caffrey PD4106-2576
Ketchikan, Alaska