June 23, 2018, 08:20:33 AM

Author Topic: 4106 tilt steering  (Read 1984 times)

Offline Darrelldvm

  • Newbie
  • *
  • Posts: 11
4106 tilt steering
« on: January 31, 2013, 06:40:44 AM »
I posted this question on another board but didn't get enough info. Where do I find a source for a tilt steering column to fit a 4106? What truck has a column that will fit?   

Darrell

Offline goutoe

  • Full Member
  • ***
  • Posts: 138
Re: 4106 tilt steering
« Reply #1 on: January 31, 2013, 06:13:15 PM »
You might try some truck salvage yards, my bus has a freight liner tilt and telescoping wheel, works real well>>>> John
John & Linda 1977 AM General 6V92 turbo Detroit 3 Speed allison, 40 ft.

Offline OneLapper

  • Hero Member
  • *****
  • Posts: 853
    • www.markdavia.com
Re: 4106 tilt steering
« Reply #2 on: February 01, 2013, 03:10:12 AM »
Some of the more learned may correct me, but I'm not aware that any 4106's came with tilt steering wheels.

That being said, I don't think it would be too difficult to stall one.  Remove the upper steering column, cut the shaft, have a professional weld in the u joint and attach your new/used tilting column. 

Hmmm, you got me thinkin......
OneLapper
1964 PD4106-2853
www.markdavia.com