« previous next »
Pages: [1]   Go Down

Author Topic: MC-8 part numbers  (Read 2232 times)

Offline tekebird

  • Hero Member
  • *****
  • Posts: 2264
MC-8 part numbers
« on: April 26, 2013, 01:15:15 PM »
Anyone have a parts book? and would not mind looking up the #'s for tie rod ends and draglink/drag link ends?

thanks in advance
Logged

Offline John316

  • Hero Member
  • *****
  • Posts: 3548
  • MCI 1995 DL3, DD S60, Allison B500.
Re: MC-8 part numbers
« Reply #1 on: April 26, 2013, 01:31:29 PM »
I don't have an 8 book. However, you might try MCI tech support. They should have all the books and are usually very helpful.

FWIW

John
Logged
Sold - MCI 1995 DL3. DD S60 with a Allison B500.

Offline tekebird

  • Hero Member
  • *****
  • Posts: 2264
Re: MC-8 part numbers
« Reply #2 on: April 26, 2013, 03:18:34 PM »
already went that route...no Joy.

MCI is purging a lot of old stuff.

The part is a  vendor part and I am trying to track down the cross reference numbers so we can go direct to  source but need the MCI number to start.......my manual went with the bus...and is not handy at this time
Logged

Offline MC8Mike

  • Full Member
  • ***
  • Posts: 104
Re: MC-8 part numbers
« Reply #3 on: April 26, 2013, 04:20:17 PM »
I show the drag link end at axle as a 11r-4-4, pitman arm end is a 11r-4-5
cross tube ends are lh 1c-2-62 and the rh end is 1c-2-63
Logged
1973 MC8 in progress. 8V92TA, HT740D, Ross Steering. Fallon, Nevada

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26066
Re: MC-8 part numbers
« Reply #4 on: April 26, 2013, 04:49:12 PM »
Most of MCI front end parts are made by Euclid the king pins,tie rods and drag links,Dayton,R&S and Moog are your larger aftermarket suppliers for those parts
Logged
Life is short drink the good wine first
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2024, SimplePortal