Author Topic: Removing a rusty bolt from a battery terminal?  (Read 4193 times)

Offline belfert

  • Hero Member
  • *****
  • Posts: 6532
Removing a rusty bolt from a battery terminal?
« on: May 04, 2013, 02:05:58 PM »
I have a battery terminal on a generator that has a rusty bolt stuck to the terminal.  The terminal appears to be the poured lead style and is not the newer stamped steel style.  The terminal has been removed from the battery.

Any ideas to get the rusty bolt loose from the terminal?  I would just replace the battery cable, but it goes deep inside the generator enclosure.  Someone suggested soaking it in Coke, but is that really the best way?
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Offline Lin

  • Hero Member
  • *****
  • Posts: 5531
  • 1965 MC-5a
Re: Removing a rusty bolt from a battery terminal?
« Reply #1 on: May 04, 2013, 02:21:26 PM »
From what I have read, the best penetrating oil is a half and half mixture of transmission fluid and acetone.
You don't have to believe everything you think.

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26049
Re: Removing a rusty bolt from a battery terminal?
« Reply #2 on: May 04, 2013, 02:31:26 PM »
Coke will work so does CLR
Life is short drink the good wine first

Offline bevans6

  • Hero Member
  • *****
  • Posts: 6205
  • 1980 MCI MC-5C
Re: Removing a rusty bolt from a battery terminal?
« Reply #3 on: May 04, 2013, 02:56:59 PM »
Coke removes bugs from windshields, dissolves bolts, cleans rust off chrome plate - a million uses, plus if you get thirsty you can drink it!

Brian
1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Allison MT-647
Tatamagouche, Nova Scotia

Offline Geoff

  • Hero Member
  • *****
  • Posts: 1931
    • Geoff & Sherry's RTS Conversion Pics
Re: Removing a rusty bolt from a battery terminal?
« Reply #4 on: May 04, 2013, 05:26:34 PM »
Just cut the SOB off at the exposed shank.  This can be done with air tools.
Geoff
'82 RTS AZ

Offline belfert

  • Hero Member
  • *****
  • Posts: 6532
Re: Removing a rusty bolt from a battery terminal?
« Reply #5 on: May 04, 2013, 07:18:44 PM »
I'm not clear how cutting it off is going to help.  The bolt seems to be corroded to the terminal somehow.  I could certainly try cutting it off, but it might makes things worse if it is still stuck.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

Offline Van

  • Hero Member
  • *****
  • Posts: 3257
Re: Removing a rusty bolt from a battery terminal?
« Reply #6 on: May 05, 2013, 05:40:36 AM »
Cut the bolt in the center, use a screw driver in center to force the bolt out and then use stainless hardware. Or...
Cut the terminal off, crimp on a ring terminal and ad a stud terminal to the post  ;)
B&B CoachWorks
Bus Shop Mafia.

Offline Lin

  • Hero Member
  • *****
  • Posts: 5531
  • 1965 MC-5a
Re: Removing a rusty bolt from a battery terminal?
« Reply #7 on: May 05, 2013, 09:36:33 AM »
Maybe a picture would help avoid misunderstanding the situation.
You don't have to believe everything you think.

Offline gus

  • Hero Member
  • *****
  • Posts: 3632
Re: Removing a rusty bolt from a battery terminal?
« Reply #8 on: May 05, 2013, 03:03:17 PM »
If you have enough cable fill a plastic bag with baking soda mixed in water, put the bag over the terminal and fix it with a rubber band. I do this all the time on my home shower heads. It will take a few hours or a day, depending on the strength of the soda/water mix, but it will remove every drop of rust.

Another thing to use is the acid used in swimming pool systems but it is nasty stuff to handle, one splash and you are burned, and don't leave it on too long.
PD4107-152
PD4104-1274
Ash Flat, AR

Offline Dave5Cs

  • Hero Member
  • *****
  • Posts: 4667
  • BCM Subscriber
Re: Re: Removing a rusty bolt from a battery terminal?
« Reply #9 on: May 06, 2013, 07:02:47 AM »
Muratic acid? It will work but is not fun to work with. I agree with gus baking soda and water works every time. Also will clean really dirty grout by making a paste and taping plastic over it for 12 hours and then rinse with water.

Dave5Cs from Galaxy S III
"Perfect Frequency"1979 MCI MC5Cs 6V-71,644MT Allison.
2001 Jeep Cherokee Sport 60th Anniversary edition.
1998 Jeep TJ ,(Gone)
 Somewhere in the USA fulltiming.

Offline belfert

  • Hero Member
  • *****
  • Posts: 6532
Re: Removing a rusty bolt from a battery terminal?
« Reply #10 on: May 06, 2013, 08:09:55 AM »
I'm going to give the baking soda thing a try soon.  For the moment I have bigger fish to fry with getting some other things done on the bus.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal