Author Topic: A&I Manual DDEC IV for Bluegoose  (Read 2711 times)

Offline Hard Headed Ken

  • Sr. Member
  • ****
  • Posts: 373
  • 1988 Prevost Angola Conversion Repowered With 14L Series 60 & Eaton Ultrashift
    • Link to my engine swap
A&I Manual DDEC IV for Bluegoose
« on: June 13, 2013, 08:27:48 AM »
Jack or anyone that needs it,
 You asked about a DDEC III / IV A&I manual on the Eagles board. Here's a PDF version until you can get the hard copy. Just down load it from the link below.

Ken

https://docs.google.com/file/d/0B9Xv0QOH_HT4UTJ2SXJzS3Z4NUE/edit?usp=sharing

Here's a link to another Troubleshooting manual that may help.

https://docs.google.com/file/d/0B9Xv0QOH_HT4WWxMNHRoNHBSOWc/edit?usp=sharing
Link to my engine swap slide show

https://www.youtube.com/watch?v=oxAFFBcoTQI

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26049
Re: A&I Manual DDEC IV for Bluegoose
« Reply #1 on: June 13, 2013, 08:49:24 AM »
Let me know Jack if you want the hard copy before I check on shipping prices if the PDF works for you fine with me 
Life is short drink the good wine first

Offline rv_safetyman

  • Hero Member
  • *****
  • Posts: 2199
  • Jim Shepherd
    • Bus Project Details
Re: A&I Manual DDEC IV for Bluegoose
« Reply #2 on: June 13, 2013, 05:37:33 PM »
WOW!!!

For those of you who do not know, this Application and Installation Manual is the BIBLE for a Series 60 engine conversion.  The DDEC III used to be hard to find in print.  Have not tried to find the IV is print.

I have the III Application and Installation manual and I could not have installed the Series 60 without it.  I assume that the IV has the same information (downloaded, but did not review).  It also has a ton of other data that will help sort out all sorts of problems.

The IV manual should cover the III, as they are very close technology.  I had to install a IV ECM on my first III engine and everything that I could see was the same.

To download, you will have to sign in using your google login, but that is not a big deal

Thanks Ken!!!!

Jim
Jim Shepherd
Evergreen, CO
’85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26049
Re: A&I Manual DDEC IV for Bluegoose
« Reply #3 on: June 13, 2013, 06:14:07 PM »
The manuals I have the A&I for the lll and lV DDEC are in the same manual so it says on the cover fwiw
Life is short drink the good wine first

Offline Hard Headed Ken

  • Sr. Member
  • ****
  • Posts: 373
  • 1988 Prevost Angola Conversion Repowered With 14L Series 60 & Eaton Ultrashift
    • Link to my engine swap
Re: A&I Manual DDEC IV for Bluegoose
« Reply #4 on: June 13, 2013, 06:45:40 PM »
The PDF I have says DDEC IV not III/IV. It's not exactly what Jack ask for but maybe better than nothing. I always prefer a hard copy manual and have purchased several even if I have the same one in PDF. Guess I'm just old school, I like looking at real pages, only use the electronic version when I have to.

Ken
Link to my engine swap slide show

https://www.youtube.com/watch?v=oxAFFBcoTQI

Offline blue_goose

  • Hero Member
  • *****
  • Posts: 663
Re: A&I Manual DDEC IV for Bluegoose
« Reply #5 on: June 14, 2013, 04:46:18 AM »
Well isn't this great, a copy for the computer and one that I can hold in my hands to read.  I would like to have both of them. 
Thanks Clifford and Ken.
Jack

Offline Don Fairchild

  • Hero Member
  • *****
  • Posts: 792
Re: A&I Manual DDEC IV for Bluegoose
« Reply #6 on: June 14, 2013, 01:54:58 PM »
Ken, I'm with you. If it don't have pictures I am lost. HE HE

How you been anyway, haven't talked to you in a while

Don

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal