June 23, 2018, 05:58:57 AM

Author Topic: Front Door Seals for a MCI 9  (Read 2440 times)

Offline grantgoold

  • Hero Member
  • *****
  • Posts: 1084
Front Door Seals for a MCI 9
« on: August 29, 2013, 02:30:52 AM »
I am looking for some help on the front door seals for my MCI 9. The parts book is no good for this. I need both the flat seal that sits in a track and then the second seal that is behind it towards the interior. Both of these seals appear to be in the door pocket and are not attached to the actual door. Anybody replaced theirs recently?

Any help would be much appreciated.

Regards,

Grant
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California

Offline RJ

  • Angola Coach Conversion "Aesop's Tortoise"
  • Hero Member
  • *****
  • Posts: 3567
Re: Front Door Seals for a MCI 9
« Reply #1 on: August 29, 2013, 04:40:41 AM »
Grant -

Perhaps Luke can assist you: 1-888-262-2434

FWIW & HTH. . .

 ;)
RJ Long
PD4106-2784 No More
S13406 1978 MC-5C Converted
6V71/MT-644
S14947 1980 MC-5C Shell
6V92/HT-740
Cheney WA

Offline grantgoold

  • Hero Member
  • *****
  • Posts: 1084
Re: Front Door Seals for a MCI 9
« Reply #2 on: August 29, 2013, 04:55:04 AM »
Good idea! Thanks RJ
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California

Offline Jriddle

  • Hero Member
  • *****
  • Posts: 707
Re: Front Door Seals for a MCI 9
« Reply #3 on: August 29, 2013, 10:34:13 AM »
Grant
Luke got mine for me. Now I need to install I have had them about one year.
LOL
John
« Last Edit: August 29, 2013, 10:36:10 AM by Jriddle »
If It Can't Be Grown Then It Has To Be Mined
John Riddle
Wells NV
1984 MC9

Offline grantgoold

  • Hero Member
  • *****
  • Posts: 1084
Re: Front Door Seals for a MCI 9
« Reply #4 on: August 29, 2013, 12:58:31 PM »
John, what kind of money did you spend?


Grant
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California

Offline Frank @ TX

  • Sr. Member
  • ****
  • Posts: 253
Re: Front Door Seals for a MCI 9
« Reply #5 on: August 29, 2013, 04:35:39 PM »
Make sure you clean out the tracks so the new seals will set in good.
Luke got them for me about 2 years ago.
Frank

Offline Jriddle

  • Hero Member
  • *****
  • Posts: 707
Re: Front Door Seals for a MCI 9
« Reply #6 on: August 29, 2013, 06:03:48 PM »
Grant
I can't remember. I got window rubber for the front windshields, bushings for engine cooling blower and a few turn buckles. Seems like I spent three or four hundred.

John
« Last Edit: August 29, 2013, 08:10:52 PM by Jriddle »
If It Can't Be Grown Then It Has To Be Mined
John Riddle
Wells NV
1984 MC9

Offline grantgoold

  • Hero Member
  • *****
  • Posts: 1084
Re: Front Door Seals for a MCI 9
« Reply #7 on: August 29, 2013, 09:41:38 PM »
John, thanks I was able to get MCI online to help and they gave me the part numbers and an explanation of the process. Down side, I need to order $250.00 or more in order not to get hit with a 50% increase in cost for shipping and handling.  >:(

So, I will contact Luke or wait until I need some more items.

Thanks

Grant
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California