June 23, 2018, 12:28:19 PM

Author Topic: How to Bus build book  (Read 6366 times)

Offline Geoff

  • Hero Member
  • *****
  • Posts: 1458
    • Geoff & Sherry's RTS Conversion Pics
Re: How to Bus build book
« Reply #15 on: September 11, 2013, 04:03:16 PM »
Im redoing a coach, and it's a mess with both 12 and 24 volt system, and none of the wiring is marked

I thought I disconnected all the 24v wiring when you had your bus over here.  Everything should be 12v, you just have a lot of left-over relays that aren't doing anything.  You need to get 4 batteries in the left side battery compartment (I recommend 4 6v golf carts hooked for 12v to run your house system).  Corroded wiring in the driver's area is a matter of rewiring.  Everything should be 12v.

--Geoff
Geoff
'82 RTS AZ

Offline harleyman_1000

  • Hero Member
  • *****
  • Posts: 571
    • My bus
Re: How to Bus build book
« Reply #16 on: September 12, 2013, 01:17:24 AM »
I thought I disconnected all the 24v wiring when you had your bus over here.  Everything should be 12v, you just have a lot of left-over relays that aren't doing anything.  You need to get 4 batteries in the left side battery compartment (I recommend 4 6v golf carts hooked for 12v to run your house system).  Corroded wiring in the driver's area is a matter of rewiring.  Everything should be 12v.

--Geoff

 Yes Geoff you did, and now I want to remove all the 24 volt wiring and relays that aren't being used. I want to have the genset charge the batteries when it's running. I am thinking on just rewiring a new house battery system, but not removing the old wiring untill I see if my wiring works  ::)
Scott 
St.Louis Missouri

1958 GM 4104 Extended 2 feet, with a 6v92 and 5 speed automatic

http://s783.photobucket.com/user/harleyman_1000/library/Gm4104%20bus?sort=3&page=1

Offline Melbo

  • Hero Member
  • *****
  • Posts: 1203
  • MC8 under construction
Re: How to Bus build book
« Reply #17 on: September 12, 2013, 01:35:19 AM »
PM me an address and I will send you a book about RV wiring that I read and no longer use.

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF