Author Topic: Fuel Pro fuel filter  (Read 1500 times)

Offline Mike in GA

  • Sr. Member
  • ****
  • Posts: 379
Fuel Pro fuel filter
« on: April 14, 2014, 11:51:32 AM »
Recently installed the see-through Fleetguard Fuel Pro Series 230 filter on the 8v92 TA.
Big improvement over the standard two spin-on filter operation that came standard.         
      Time to change the Fuel Pro filter element. I see from the Fleetguard website that there are several choices for the filter element, ranging from 2 microns, through 7, 10, 25, and even 50 microns.
     Which filter rating is recommended for our type of use?
     Thanks in advance!
Mike in GA
Past President, Southeast Bus Nuts. Busin' for more than 15 years in a 1985 MC 96a3 with DD 8v92 and a 5 speed Allison c/r.

Online luvrbus

  • Hero Member
  • *****
  • Posts: 19946
Re: Fuel Pro fuel filter
« Reply #1 on: April 14, 2014, 12:51:25 PM »
DD says nothing above 12 but most use the alternate 5 microns for the 8v92 per DD

good luck
Life is short drink the good wine first

Offline Mike in GA

  • Sr. Member
  • ****
  • Posts: 379
Re: Fuel Pro fuel filter
« Reply #2 on: April 16, 2014, 08:06:53 AM »
Thanks Cilfford. Is that 5 micron flilter a Fleetguard Fuel Pro, or some other brand?
Cheers!
Mike in GA
Past President, Southeast Bus Nuts. Busin' for more than 15 years in a 1985 MC 96a3 with DD 8v92 and a 5 speed Allison c/r.