Author Topic: Trimming interior roof curves?  (Read 4845 times)

Offline Tony LEE

  • Sr. Member
  • ****
  • Posts: 495
    • Photo Albums
Re: Trimming interior roof curves?
« Reply #15 on: August 08, 2014, 05:08:19 PM »
Thanks for the responses everyone, really appreciate it.

Sorry if I was a bit unclear before: I was talking about a wall that goes across the width of the bus, so one side of the paneling is curved to match the curvature of bus side wall. That's where I need the flexible trim. Here's a pic of the place I mean: https://db.tt/PBFTfY26

Cary and Don: I can't get in my mind exactly what you mean about laying the crown molding flush to the wall and having a gap... sorry about the dense-ness, haha. I didn't think crown molding would work where I'm talking about because of the curvature... Does the 4107 have curved sides like an MC9?

Charles in SC: I will have to look into that, thanks for the tip!

I made up a crude steamer and steam bent normal timber mouldings

Offline mike802

  • Sr. Member
  • ****
  • Posts: 310
  • 1983 MCI MC9
    • www.mjamsdenfurniture.com
Re: Trimming interior roof curves?
« Reply #16 on: August 08, 2014, 05:09:38 PM »
Luke:  That looks like a really cool idea!  it's amazing what you can find on youtube. Good luck with the project and don't forget to let's us know how it turns out.
Mike
1983 MCI MC9
Vermont