Author Topic: hydraulic leveling mci-9  (Read 4962 times)

Offline thomasinnv

  • Derrick Thomas
  • Hero Member
  • *****
  • Posts: 1299
  • I may be nuts, but only for buses
Re:
« Reply #15 on: June 23, 2015, 12:16:34 PM »
4 jacks would be just fine with most of the modern leveling system controls now a days. The modern hydrualic systems always operate 2 jacks at a time so it would not be capable of twisting or torquing the bus. The only way to operate a single jack independently is to enter installer programming mode which you can not do by accident, you gotta know what you're doing to get there.
Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 12.7/Alison B500
95% converted (they're never really done, are they?)

Offline uncle ned

  • Hero Member
  • *****
  • Posts: 1248
    • Visit: Busconversionstuff.com
Re: hydraulic leveling mci-9
« Reply #16 on: June 23, 2015, 01:40:08 PM »
Scott  You should have crawled under HUGGY at Arcadia.  She has 4 hydraulic jacks under her.  been that way for about 15 years

not twisted into yet.  I am not much on pictures much less posting them.

Tom Hamrick put 4 under his eagle that Sean has now. check them out,I think they were big foot

uncle ned
4104's forever
6v92 v730
Huggy Bear

Offline Scott & Heather

  • Scott & Heather's buses: MCI-9 & MCI-102
  • Hero Member
  • *****
  • Posts: 4251
  • MCI-9 & MCI-102
    • Fresh Day Music
Re: hydraulic leveling mci-9
« Reply #17 on: June 23, 2015, 07:17:03 PM »
Sean's jacks are sweet. I love them


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9