Author Topic: 1988 MCI Bus Entrance Door  (Read 1894 times)

Offline roadmangler

  • Newbie
  • *
  • Posts: 3
1988 MCI Bus Entrance Door
« on: August 23, 2016, 05:25:23 PM »
Hi Everybody
    I have a 1988 MCI bus conversion with a problem the switches for the entrance door do not work. I was on a website called FYI from MCI, it said to check fuse F15. Where would I find this fuse?
                                                      Thanks for your help
                                                                 MAX

Offline gumpy

  • Some Assembly Required
  • Hero Member
  • *****
  • Posts: 4103
  • Slightly modified 1982 MC9
    • bus.gumpydog.com
Re: 1988 MCI Bus Entrance Door
« Reply #1 on: August 26, 2016, 06:08:59 AM »
Should be in the drivers side electrical panel, I would think. Check your manual.

What model is it?
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"

Offline roadmangler

  • Newbie
  • *
  • Posts: 3
Re: 1988 MCI Bus Entrance Door
« Reply #2 on: August 26, 2016, 06:28:37 AM »
Good Morning Grumpy
      Its a 96 A3

Offline roadmangler

  • Newbie
  • *
  • Posts: 3
Re: 1988 MCI Bus Entrance Door
« Reply #3 on: August 26, 2016, 06:31:36 AM »
I mean Gumpy

Offline thomasinnv

  • Derrick Thomas
  • Hero Member
  • *****
  • Posts: 1289
  • I may be nuts, but only for buses
Re:
« Reply #4 on: August 26, 2016, 06:43:44 AM »
Open the access door under the driver window. You might get lucky and find a decal on the inside of the door with the fuse location. Fyi the main disconnect has to be on for the door switch to have power.
Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 12.7/Alison B500
95% converted (they're never really done, are they?)