Author Topic: Shutterstat Removal and Replace Procedure  (Read 1808 times)

Offline neoneddy

  • Sr. Member
  • ****
  • Posts: 277
    • Youtube Build Log
Re: Shutterstat Removal and Replace Procedure
« Reply #15 on: December 06, 2017, 12:34:54 PM »
I know it was controversial, but I went for it.  I even recorded it for the youtube.

I'd estimate I lost 1 Tablespoon to 1/4th cup of coolant.

Now to fix my block heater cord so she'll start.
Raising hell in Ham Lake, MN

1982 MCI MC9

6V92 / 4 Speed Auto (HT740) - 1950 Watts of Solar - Victron Inverters and Solar Controllers
 - Current Status - Livable, still 10-20% more to go.  Video Build Log

Offline Scott & Heather

  • Scott & Heather's buses: MCI-9 & MCI-102
  • Hero Member
  • *****
  • Posts: 4251
  • MCI-9 & MCI-102
    • Fresh Day Music
Shutterstat Removal and Replace Procedure
« Reply #16 on: December 06, 2017, 05:33:12 PM »
Nice job. I love everyone here, but I do wonder how anal some of us are about stuff that’s simple. If you post a thread on which is the best tire Schrader valve cap to use, it would exceed three pages of ramblings....that’s just insane.


Sent from my iPhone using Tapatalk Pro
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

Online buswarrior

  • Hero Member
  • *****
  • Posts: 4620
  • '75 MC8 8V71 HT740
Re: Shutterstat Removal and Replace Procedure
« Reply #17 on: December 07, 2017, 05:07:34 AM »
Personality concentrations here... no choice?

Heavy "Type A", critical of commercially available campers, hard core DIY

Mix in the "retired time wasting to fill the day"...

And, "sharing with others" so they won't screw up like I did...

A shade of "I want to type something I read on the Internet too"...

We are doomed and blessed all at the same time?

Happy coaching!
Buswarrior
Frozen North, Greater Toronto Area

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 19581
Re: Shutterstat Removal and Replace Procedure
« Reply #18 on: December 07, 2017, 05:33:27 AM »
Yep just like I told a new guy if you want to know how to build a watch just ask "what time is it" somebody on the internet will tell how to build a watch 
Life is short drink the good wine first

Offline gumpy

  • Some Assembly Required
  • Hero Member
  • *****
  • Posts: 4103
  • Slightly modified 1982 MC9
    • bus.gumpydog.com
Re: Shutterstat Removal and Replace Procedure
« Reply #19 on: December 07, 2017, 06:29:14 AM »
Nice job. I love everyone here, but I do wonder how anal some of us are about stuff that’s simple. If you post a thread on which is the best tire Schrader valve cap to use, it would exceed three pages of ramblings....that’s just insane.


Maybe we're just bored waiting for your next breakdown so we can all help you out again.
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"

Offline neoneddy

  • Sr. Member
  • ****
  • Posts: 277
    • Youtube Build Log
Re: Shutterstat Removal and Replace Procedure
« Reply #20 on: December 27, 2017, 12:05:14 PM »
I wanted to post a final follow up here.

For whatever reason this cold -5 degree morning seemed a great time to  make sure the coach batteries stayed charged.

Sure enough, somewhere around  190 indicated temp I saw the shutters open... then as the temp dropped, they snapped shut.

I think this cold snap marks the end of my fall work season... hopefully in late February or early March I can continue.
Raising hell in Ham Lake, MN

1982 MCI MC9

6V92 / 4 Speed Auto (HT740) - 1950 Watts of Solar - Victron Inverters and Solar Controllers
 - Current Status - Livable, still 10-20% more to go.  Video Build Log