Author Topic: 4104 bearing part numbers  (Read 1881 times)

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
4104 bearing part numbers
« on: September 08, 2019, 06:40:39 PM »
Hi all,
I am looking for front wheel bearing, race and seal part numbers for a 1956 GMC 4104.
Thank you,
Bob
Bob & Tracey Rice   

1956 GMC PD4104-1611

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2242
Re: 4104 bearing part numbers
« Reply #1 on: September 09, 2019, 12:17:28 AM »
Okay Bob & Tracy - here is the lowdown... We have a 1953 4104 and performed front bearings & seal replacement in Apr. of 2017 and should be good numbers for your 1956. I found them on eBay (new old stock) & have posted what I paid for each. You'll save a bundle of you can do the same rather than going to a bearing supplier. Here goes: Front inner seal - Timken/National Industrial seal 417507 $19.95. Front outer cup (race) Timken 552A $14.99. Front outer bearing 557S $32.00. Front Inner Bearing 6379 & Front inner cup (race) 6320 both $98.00. Google the numbers, they may show up on eBay or Amazon or somewhere. Good luck. Tell us how you do. Dan
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline uncle ned

  • Hero Member
  • *****
  • Posts: 1384
    • Visit: Busconversionstuff.com
Re: 4104 bearing part numbers
« Reply #2 on: September 09, 2019, 08:10:21 AM »

Dan

  I got bearing replace and grease schooling at Arcadia. I got to watch Paco do his there.

Looking forward to Blytheville and see everyone.

uncle ned
4104's forever
6v92 v730
Huggy Bear

Offline Paso One

  • Hero Member
  • *****
  • Posts: 658
Re: 4104 bearing part numbers
« Reply #3 on: September 09, 2019, 08:28:25 AM »
Bob and Tracy If you can wait till Blytheville I can supply all you need using Dan's numbers for "FREE " I have a shelf full  of 552 A -557 S and 6379 and 6320.
Dan make sure you leave enough time to grab a spare set for your bus, I won't live long enough to sell all that i have on the shelf. :D 
68 5303 Fishbowl 40'x102" 6V92 V730 PS, Air shift  4:10 rear axle. ( all added )
1973 MC-5B 8V71 4 speed manual
1970 MC-5A  8V71 4 speed manual
1988 MCI 102 A3 8V92T  4 speed manual (mechanical)
1996 MCI 102 D3 C10  Cat engine 7 speed manual  (destined to be a tiny home )

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2242
Re: 4104 bearing part numbers
« Reply #4 on: September 09, 2019, 12:03:17 PM »
Paul your on!  :)
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2242
Re: 4104 bearing part numbers
« Reply #5 on: September 09, 2019, 12:05:30 PM »
Bob & Tracy if you weren't going to the Blytheville Homecoming, you should be now!  :)
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
Re: 4104 bearing part numbers
« Reply #6 on: September 09, 2019, 07:34:28 PM »
Thanks guys, I am not sure I need them but will know on Wednesday, please fill me in on Blythville...
Bob & Tracey Rice   

1956 GMC PD4104-1611

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2242
Re: 4104 bearing part numbers
« Reply #7 on: September 10, 2019, 10:39:20 AM »
Look at page 3 of this forum "2019 Blytheville, Arkansas Antique Bus Homecoming Sept, 27-29"
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
Re: 4104 bearing part numbers
« Reply #8 on: September 10, 2019, 02:46:23 PM »
Nuts, we will be passing through Arkansas mid Oct.
Bob & Tracey Rice   

1956 GMC PD4104-1611

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
Re: 4104 bearing part numbers
« Reply #9 on: September 11, 2019, 03:27:23 PM »
Paso One, any chance you would ship a set or two at my cost?
Bob & Tracey Rice   

1956 GMC PD4104-1611

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
Re: 4104 bearing part numbers
« Reply #10 on: September 19, 2019, 08:31:59 AM »
I found everything on Ebay and paid just about what Dan did.

Thanks for the help,
Bob
Bob & Tracey Rice   

1956 GMC PD4104-1611

Offline Paso One

  • Hero Member
  • *****
  • Posts: 658
Re: 4104 bearing part numbers
« Reply #11 on: September 19, 2019, 01:31:36 PM »
Dan is here now  he will take them to Florida and ship them to you.
Sorry i missed this post.
He will ship you
2-552A
2- 557S
2- 6379
2-6320
We can't find seal # 417507 as yet but are looking.
68 5303 Fishbowl 40'x102" 6V92 V730 PS, Air shift  4:10 rear axle. ( all added )
1973 MC-5B 8V71 4 speed manual
1970 MC-5A  8V71 4 speed manual
1988 MCI 102 A3 8V92T  4 speed manual (mechanical)
1996 MCI 102 D3 C10  Cat engine 7 speed manual  (destined to be a tiny home )

Offline Paso One

  • Hero Member
  • *****
  • Posts: 658
Re: 4104 bearing part numbers
« Reply #12 on: September 19, 2019, 01:57:44 PM »
No seal but it matches to CR 40078 or GM # 2030123
According to website they are only $6.00 so you can source locally.
68 5303 Fishbowl 40'x102" 6V92 V730 PS, Air shift  4:10 rear axle. ( all added )
1973 MC-5B 8V71 4 speed manual
1970 MC-5A  8V71 4 speed manual
1988 MCI 102 A3 8V92T  4 speed manual (mechanical)
1996 MCI 102 D3 C10  Cat engine 7 speed manual  (destined to be a tiny home )

Offline Bob & Tracey

  • Full Member
  • ***
  • Posts: 186
Re: 4104 bearing part numbers
« Reply #13 on: September 20, 2019, 05:20:42 AM »
Paso One, thank you! I wish we could meet you in Blytheville but we are still in Wisconsin for a week. We will spend the winter in south Florida so may be I can meet Dan and get the parts from him. Thanks again!

Bob
Bob & Tracey Rice   

1956 GMC PD4104-1611

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal