Author Topic: Reducing engine noise levels  (Read 6577 times)

Offline hogi6123

  • Full Member
  • ***
  • Posts: 214
Reducing engine noise levels
« on: August 26, 2021, 06:03:20 AM »
Do school buses / skoolies suffer from very loud engine noise?

I have a T444e and at545, it's in a truck not a bus but I know a lot of buses have this combination.  My ears continue ringing for days after every time I drive it.

The exhaust outlet is just behind and below the cab.  I found one person saying they lengthened the exhaust to the rear axle and "think the noise is slightly less".

I think most of the noise comes straight from the engine itself.

Do you have any practical suggestions for reducing the noise a lot?
1981 MC-9

Offline buswarrior

  • Hero Member
  • *****
  • Posts: 6572
  • the old one: '75 MC8 with an 8V71 HT740
Re: Reducing engine noise levels
« Reply #1 on: August 26, 2021, 01:34:00 PM »
Many years ago, we used carpet scraps on the floor in the school buses to combat some of the noise.

If you could find some underpadding too, well that made you king!

Lined right to the edge of where the kids climbed the stairs.

Loved every minute of it, ain't going back, great respect for those who continue to get 'em to the education and home again!

Lowest paid commercial driver on the road, with the biggest responsibility, and in many jurisdictions, the greatest licence requirements.

Happy coaching!
Buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

Offline sandra@BCM

  • Administrative Assistant & Sales Representative
  • Sr. Member
  • ****
  • Posts: 264
  • "ThE oNlY tHiNg CoNsTaNt In My LiFe Is ChAnGe"ZuhG
    • Facebook
Re: Reducing engine noise levels
« Reply #2 on: September 08, 2021, 01:04:40 PM »
Do school buses / skoolies suffer from very loud engine noise?

I have a T444e and at545, it's in a truck not a bus but I know a lot of buses have this combination.  My ears continue ringing for days after every time I drive it.

The exhaust outlet is just behind and below the cab.  I found one person saying they lengthened the exhaust to the rear axle and "think the noise is slightly less".

I think most of the noise comes straight from the engine itself.

Do you have any practical suggestions for reducing the noise a lot?

Perhaps some kind of heat barrier would help with the noise as well.

https://engineheatprotection.com/

We have a pusher with a CAT 3116 and we have no issues with engine noise. 

#BusConversionMagazine  :)
#buslivin :)

Offline hogi6123

  • Full Member
  • ***
  • Posts: 214
Re: Reducing engine noise levels
« Reply #3 on: November 01, 2021, 06:50:25 PM »
Well I finally checked the transmission fluid level for the first time, because there were some drips under the truck, and had to add 3 quarts.  And surprise!  It cut the engine noise levels in half at least!  Plus smoother shifting and noticeably more power.
1981 MC-9

Offline s2mikon

  • Newbie
  • *
  • Posts: 21
Re: Reducing engine noise levels
« Reply #4 on: November 28, 2021, 08:31:06 PM »
I have a rear pusher with Cummins 8.3 and I have to open a window to hear it running. Should have got a shorter bus. :-)

 

SimplePortal 2.3.7 © 2008-2025, SimplePortal