BCM Community
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
BCM Home
Forum
Help
Forum Rules
Search
Login
Register
BCM Community
»
Bus Discussion
»
Bus Topics ( click here for quick start! )
(Moderator:
Nick Badame Refrig/ACC
) »
Zerk lube for MCI 9s
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Zerk lube for MCI 9s (Read 5595 times)
grantgoold
Hero Member
Posts: 1085
Zerk lube for MCI 9s
«
on:
February 15, 2008, 09:58:09 PM »
What are people using as a good zerk lubricant for their buses?
Logged
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California
tekebird
Hero Member
Posts: 2264
Re: Zerk lube for MCI 9s
«
Reply #1 on:
February 15, 2008, 11:04:10 PM »
Grease
Logged
JackConrad
Orange Blossom Special II
Hero Member
Posts: 4448
73' MC-8 8V71/HT740 Southwest Florida
Re: Zerk lube for MCI 9s
«
Reply #2 on:
February 16, 2008, 04:40:58 AM »
I buy a case of Hi-Temp All Purpose cartridges for my grease guns.
Logged
Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/
chazwood
Sr. Member
Posts: 430
Re: Zerk lube for MCI 9s
«
Reply #3 on:
February 16, 2008, 04:50:40 AM »
The question isn't what to use in the Zerk's......
it's where are they all ?
Logged
1983 Eagle Bus Model 10
6V92
Thekempters.com
buswarrior
Hero Member
Posts: 6568
the old one: '75 MC8 with an 8V71 HT740
Re: Zerk lube for MCI 9s
«
Reply #4 on:
February 16, 2008, 05:29:56 AM »
Everywhere, and then some!
Good quality chassis grease of your choosing will do.
And a good quality powered grease gun will mean you are more likely to get it all done without getting tired and start skimping...
happy coaching!
buswarrior
Logged
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift
Dallas
Guest
Re: Zerk lube for MCI 9s
«
Reply #5 on:
February 16, 2008, 05:43:51 AM »
Yup, What BW said,
and I'll add that you really need to purchase a grease zerk kit with a hundred or so extra zerks of all sorts in it. Also get a bunch of paper clips of different sizes to scrape out the old dry grease in those holes where you remove a plugged zerk. It probably hasn't been greased in years.
Good Luck, and have lot's of fun!
Dallas
Logged
chazwood
Sr. Member
Posts: 430
Re: Zerk lube for MCI 9s
«
Reply #6 on:
February 16, 2008, 06:04:25 AM »
No really... is there a one page map to all the grease fittings on a mc9? Or do you have to plow through the maintenance manual to find them all?
Someone should make a diagram and sell it. I'd buy one.
Logged
1983 Eagle Bus Model 10
6V92
Thekempters.com
grantgoold
Hero Member
Posts: 1085
Re: Zerk lube for MCI 9s
«
Reply #7 on:
February 16, 2008, 06:55:11 AM »
Thanks for all the input especially the "grease" one that was good!
I have the airpowered unit and will get to Napa today. My manual does show all lubrication points in the bus. I just took out a highlighter and marked those that are zerks and need the grease.
Good day!
Grant
Logged
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California
chazwood
Sr. Member
Posts: 430
Re: Zerk lube for MCI 9s
«
Reply #8 on:
February 16, 2008, 07:43:35 AM »
well lucky you, you have a manual.
Hint. Hint.
Logged
1983 Eagle Bus Model 10
6V92
Thekempters.com
Tenor
Hero Member
Posts: 1005
Re: Zerk lube for MCI 9s
«
Reply #9 on:
February 16, 2008, 08:08:06 AM »
Chaz,
I forgot to add that buses are engineered to transport Zerk fittings safely too!
Logged
Glenn Williams
Lansing, MI
www.threemenandatenor.com
1968 MCI 7 Ser. No. 7476 Unit No. 10056
8v71
4 speed Spicer
chazwood
Sr. Member
Posts: 430
Re: Zerk lube for MCI 9s
«
Reply #10 on:
February 16, 2008, 12:15:38 PM »
Quote from: Tenor on February 16, 2008, 08:08:06 AM
Chaz,
I forgot to add that buses are engineered to transport Zerk fittings safely too!
You lost me here.
refresh my memory....what were we talking about.?
Never mind...I just read your reply to the other post....now I get it.
That tank removal was brutal. I think I'd rather drop the engine than go through that again.
Logged
1983 Eagle Bus Model 10
6V92
Thekempters.com
Print
Pages: [
1
]
Go Up
« previous
next »
BCM Community
»
Bus Discussion
»
Bus Topics ( click here for quick start! )
(Moderator:
Nick Badame Refrig/ACC
) »
Zerk lube for MCI 9s
SimplePortal 2.3.7 © 2008-2024, SimplePortal