June 23, 2018, 12:39:16 PM

Author Topic: Question for DD-3 to Spring Brakes on an Eagle 01  (Read 5314 times)

Dreamscape

  • Guest
Re: Question for DD-3 to Spring Brakes on an Eagle 01
« Reply #30 on: October 13, 2008, 10:35:35 AM »
Sojourner,

I posted my question on an Eagle Bus Nuts Group and had a couple of replies. One said he had the diagram for switching from DD-3's to spring brakes, the other said that he did it several years ago and it was not a big deal and would post how he did it. He had to go look at his coach to refresh his memory.

I will let you know what I find out.

If I don't hear anything back by this Friday, I'm going to order the kit for the DD-3's from Norris and get on with it.

Going to take apart the one suspected can today, and see where the real problem is.

John,

Glad you enjoyed the rally! I have one question, why did you remove the wheels when you had the problem? You said to make an adjustment to the slacks. I always thought you did that with the wheels on, just curious.

There is a ton of room on Eagles to make the change. I have never seen an MCI so I will leave that up to the experts.

Good Luck and let us know how you come out,

Paul

Offline niles500

  • Niles500
  • Hero Member
  • *****
  • Posts: 1316
  • ROSIE
Re: Question for DD-3 to Spring Brakes on an Eagle 01
« Reply #31 on: October 13, 2008, 02:34:05 PM »
...no, Niles, it's ok, not AA....

Jeez - you scared me there - thought I was loosing another drinking buddy sponsor  :'(
(\__/)
(='.'=)
(")_(")  

- Niles