« previous next »
Pages: [1]   Go Down

Author Topic: crank pulley  (Read 1902 times)

Offline BUR

  • Full Member
  • ***
  • Posts: 128
crank pulley
« on: March 31, 2022, 02:47:56 PM »
Will  the front crank pulley off of 8V71 fit on a 8V92
Logged
1980 Prevost   8V92 HT754CR
Homebase   Yuma AZ

Offline RJ

  • VantarĂ© Conversion "Miss Vivian"
  • Hero Member
  • *****
  • Posts: 3944
Re: crank pulley
« Reply #1 on: March 31, 2022, 09:49:01 PM »
The 8V92 has a huge vibration dampener for it's crank pulley.

FWIW & HTH. . .  ;)

RJ
Logged
1992 Prevost XL Vantaré Conversion M1001907 8V92T/HT-755 (DDEC/ATEC)
2003 VW Jetta TDI Sportwagon "Towed"
Cheney WA (when home)

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: crank pulley
« Reply #2 on: April 01, 2022, 07:54:16 AM »
Quote from: BUR on March 31, 2022, 02:47:56 PM
Will  the front crank pulley off of 8V71 fit on a 8V92



Lot of variations on DD pulleys post a photo ,if it is hub mounted it will work,the pullleys are mounted on the outside of the vibration damper which is mounted on a hub on the crank   
Logged
Life is short drink the good wine first

Offline MC8Mike

  • Full Member
  • ***
  • Posts: 104
Re: crank pulley
« Reply #3 on: April 01, 2022, 08:24:05 AM »
Yeah they fit, I used my 8v71 pulley on my 92.
Logged
1973 MC8 in progress. 8V92TA, HT740D, Ross Steering. Fallon, Nevada

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: crank pulley
« Reply #4 on: April 01, 2022, 08:34:34 AM »
The front of the crank is same size the 12v71 and the 8v92 use the same vibration damper fwiw 
Logged
Life is short drink the good wine first

Offline BUR

  • Full Member
  • ***
  • Posts: 128
Re: crank pulley
« Reply #5 on: April 01, 2022, 11:55:25 AM »
Thanks Clifford, been trying to get in touch with you. Wilbur
Logged
1980 Prevost   8V92 HT754CR
Homebase   Yuma AZ
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.7 © 2008-2026, SimplePortal