Author Topic: Electric Shades For Your Bus Conversion  (Read 9671 times)

Offline sandra@BCM

  • Administrative Assistant & Sales Representative
  • Sr. Member
  • ****
  • Posts: 264
  • "ThE oNlY tHiNg CoNsTaNt In My LiFe Is ChAnGe"ZuhG
    • Facebook
Electric Shades For Your Bus Conversion
« on: December 27, 2023, 03:58:07 PM »
Have you thought about installing electric window shades on your bus?

With just the flip of a switch, you can block out the outside world and enjoy some privacy while boondocking.

Remember to use the code BCM20 when you call to place your order with Shade Smith LLC. and get a 20% discount on your shades.

https://www.busconversionmagazine.com/bcm-blogs/electric-shades-by-gary-hatt/

#BusConversion #RVLife #WindowShades
#BusConversionMagazine  :)
#buslivin :)

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Electric Shades For Your Bus Conversion
« Reply #1 on: December 27, 2023, 04:11:54 PM »
I had day/night electric shades in the Country Coach loved it you push the button all and all the shades closed or open or you could open each shade  you wanted open also had a remote control you could set on your butt and control the shades plus they had no cords to break. I wasn't fond of the electric windshield shades but Sonja used the ones on her side 
Life is short drink the good wine first

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2337
Re: Electric Shades For Your Bus Conversion
« Reply #2 on: December 28, 2023, 06:30:16 AM »
Lazy daisy days of high tech, geeze!
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Electric Shades For Your Bus Conversion
« Reply #3 on: December 28, 2023, 07:03:33 AM »
Lazy daisy days of high tech, geeze!


High tech is nice when it works but can be a nightmare when it doesn't, one of my shades broke a bracket and pull the wire out of the motor and they wanted $300.00 for the motor, Van figured a way to replace the wire they said couldn't be done, my sewer system had a electrical problem I worked on for weeks, when Jerry and Van found the problem in a few days it was so simple the dumb clucks had the fuse labeled as a spare in the fuse box only fuse I never checked dozens of times.I could control everything in coach from a chair in the RV if I could figure out how to do it 
Life is short drink the good wine first

Offline Dave5Cs

  • Hero Member
  • *****
  • Posts: 4750
  • BCM Subscriber
Re: Electric Shades For Your Bus Conversion
« Reply #4 on: December 28, 2023, 09:35:00 AM »
We got the MCD solar black shades and the off white night shades years ago and they still work well and help with the heat and cold temps. We did not get the 250.00 motors with them but could be added at any time. But for that price they will not be. I have two hands and they work fine for that, LOL.
"Perfect Frequency"1979 MCI MC5Cs 6V-71,644MT Allison.
2001 Jeep Cherokee Sport 60th Anniversary edition.
1998 Jeep TJ ,(Gone)
 Somewhere in the USA fulltiming.

Offline lvmci

  • lvmci
  • Hero Member
  • *****
  • Posts: 2496
Re: Electric Shades For Your Bus Conversion
« Reply #5 on: January 01, 2024, 07:06:59 AM »
I like the cellular shades with their heat and cold properties. Manual hand pull down is fine with me, one less thing to break...
MCI 102C3 8V92, Allison HT740
Formally MCI5A 8V71 Allison MT643
Brandon has really got it going!

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Electric Shades For Your Bus Conversion
« Reply #6 on: January 01, 2024, 07:35:09 AM »
I had Hunter/Douglas cellular day/nite shades in the Eagle every time a string broke it would cost me $50.00 to have one re strung.Re string one is not for the faint I found out when I tried to do one lol $50.00 was cheap.I kiked the M/D in the CC you lower before it touches it is day shade lower more and it turns into night cellular shade with no strings attached   
Life is short drink the good wine first

Offline Dave5Cs

  • Hero Member
  • *****
  • Posts: 4750
  • BCM Subscriber
Re: Electric Shades For Your Bus Conversion
« Reply #7 on: January 01, 2024, 10:05:50 AM »
Yep ours are spring loaded and just give it a little tug and up they go. Pull down and they stay where you want them. :^
"Perfect Frequency"1979 MCI MC5Cs 6V-71,644MT Allison.
2001 Jeep Cherokee Sport 60th Anniversary edition.
1998 Jeep TJ ,(Gone)
 Somewhere in the USA fulltiming.

Offline windtrader

  • Hero Member
  • *****
  • Posts: 2528
Re: Electric Shades For Your Bus Conversion
« Reply #8 on: January 01, 2024, 10:19:46 AM »
I had Hunter/Douglas cellular day/nite shades in the Eagle every time a string broke it would cost me $50.00 to have one re strung.Re string one is not for the faint I found out when I tried to do one lol $50.00 was cheap.I kiked the M/D in the CC you lower before it touches it is day shade lower more and it turns into night cellular shade with no strings attached
Clifford, Not that hard once you figure out how to slide the top rail off. Most important is getting the proper cord, buy that from HD, it's cheap and is very strong.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Electric Shades For Your Bus Conversion
« Reply #9 on: January 01, 2024, 11:26:46 AM »
Clifford, Not that hard once you figure out how to slide the top rail off. Most important is getting the proper cord, buy that from HD, it's cheap and is very strong.

 
I never could get the hang of it,my blinds took about 75ft of the cord ea and cost 9 +bucks ea from H/D for that tiny cord ,they were good blinds the fabric never shown any wear.Sonja wanted the H/D me I would have gone a cheaper route H/D blinds are expensive to me
Life is short drink the good wine first

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal