Author Topic: Grease Monkey  (Read 65883 times)

Offline lvmci

  • lvmci
  • Hero Member
  • *****
  • Posts: 2496
Re: Grease Monkey
« Reply #120 on: March 10, 2021, 08:50:50 PM »
I think some of the more verbose, should take some chilling, speaking of taking things past their natural ending...
MCI 102C3 8V92, Allison HT740
Formally MCI5A 8V71 Allison MT643
Brandon has really got it going!

Offline Busted Knuckle

  • Hero Member
  • *****
  • Posts: 6723
  • 6 Setras, 2 MCIs, and 1 Dina. Just buses ;D
    • KY Lakeside Travel ... Just 4 the Fun of it!
Re: Grease Monkey
« Reply #121 on: March 11, 2021, 01:39:46 PM »
I personally know Clifford and Scott which is why I have stayed out of this thread as I have watched it get bashed and blasted all along!
Both Scott and Clifford are good mechanics and while Clifford has likely forgotten more than I will ever know about many things, he never lets me down when it comes to helping figure out a problem. Scott is a lot like me he is a self learner and not had formal training. I haven't had any formal training since I got out of high school in 1984. But I have continued to learn as I go. (I take that back when dad an I went way into dept and bought 2 Setra S417's, Setra invited our mechanic an I to a training school for 2 weeks all we had to do was get to Salt Lake City, UT and home and Setra picked up the tab for everything else)
But anyway the point is that some people like Clifford, some people like Scott & a couple of us including myself like both.
Some people dislike Clifford, some dislike Scott and I am sure somewhere out there is some arrogant dumbass that doesn't like either one!
So can we let this thread go and get on with buses and not bashing?
;D  BK  ;D
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

Offline Lin

  • Hero Member
  • *****
  • Posts: 5533
  • 1965 MC-5a
Re: Grease Monkey
« Reply #122 on: March 12, 2021, 02:28:50 PM »
Well personally, I like lasagna.
You don't have to believe everything you think.

Offline Busted Knuckle

  • Hero Member
  • *****
  • Posts: 6723
  • 6 Setras, 2 MCIs, and 1 Dina. Just buses ;D
    • KY Lakeside Travel ... Just 4 the Fun of it!
Re: Grease Monkey
« Reply #123 on: March 12, 2021, 02:51:11 PM »
 ;D  :^
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

Offline oldmansax

  • Hero Member
  • *****
  • Posts: 1237
Re: Grease Monkey
« Reply #124 on: March 13, 2021, 05:14:36 AM »
Have no idea how I got into this conversation lol ,but I can assure you my 1st and most important job is caring for my wife of 50 years, buses and engines can come and go she is first in my life the rest is just a fill in when I have time 

We got married about the same time. 52 years in June for us. Best thing that ever happened to me except Jesus.

TOM
1995 Wanderlodge WB40 current
1985 Wanderlodge PT36
1990 Holiday Rambler
1982 Wanderlodge PT40
1972 MCI MC7

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2337
Re: Grease Monkey
« Reply #125 on: March 13, 2021, 05:28:26 AM »
We got married about the same time. 52 years in June for us. Best thing that ever happened to me except Jesus.

TOM

 :^ your values are awesome!
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline Utahclaimjumper

  • Hero Member
  • *****
  • Posts: 1806
Re: Grease Monkey
« Reply #126 on: March 13, 2021, 07:48:03 AM »
 We have been "hitched" 59 years and I've been wondering lately if the ball and socket in that hitch is being underutilized,,,,,I may be 80 but not dead!.>>>Dan
Utclmjmpr  (rufcmpn)
 EX 4106 (presently SOB)
Cedar City, Ut.
 72 VW Baja towed

Offline fortyniner

  • Full Member
  • ***
  • Posts: 227
Re: Grease Monkey
« Reply #127 on: March 23, 2021, 08:25:05 AM »
I personally know Clifford and Scott which is why I have stayed out of this thread as I have watched it get bashed and blasted all along!
Both Scott and Clifford are good mechanics and while Clifford has likely forgotten more than I will ever know about many things, he never lets me down when it comes to helping figure out a problem. Scott is a lot like me he is a self learner and not had formal training. I haven't had any formal training since I got out of high school in 1984. But I have continued to learn as I go. (I take that back when dad an I went way into dept and bought 2 Setra S417's, Setra invited our mechanic an I to a training school for 2 weeks all we had to do was get to Salt Lake City, UT and home and Setra picked up the tab for everything else)
But anyway the point is that some people like Clifford, some people like Scott & a couple of us including myself like both.
Some people dislike Clifford, some dislike Scott and I am sure somewhere out there is some arrogant dumbass that doesn't like either one!
So can we let this thread go and get on with buses and not bashing?
;D  BK  ;D

Years ago I was in the tool maker trade working with old guys who's knowledge was truly vast. Sadly that work was outsourced to cheaper offshore shops and a lot of that knowledge has been forgotten.

There is no substitute for working in a shop learning the trade but many (most ?) of us don't even has  access to an experienced GM/Detroit mechanic. Scott's videos are a lifesaver for guys like me who get to see the actual thing the manual is referencing before starting to mess(up) with it. 

Usually Ill post a question in one of the forums before proceeding if its something (like wheel bearings) that could have very unpleasant consequences .

Tom Phillips
PD4106-453
PD4106-2864
87 Alfa Milano
93 Range Rover
87 190e-16 Mercedes
92 Jeep Comanche

Offline TwoFeathersRD

  • Jr. Member
  • **
  • Posts: 53
Re: Grease Monkey
« Reply #128 on: May 25, 2021, 09:36:59 PM »
I can say that my view of Scott and Tyler has diminished in the last few months.

 I booked a rescue then got skipped two years ago and lost my deposit on that bus because I was relying on Scott's help.  Turns out that it was for the better in the long run.

I purchased another bus three months ago and did book through Tyler. Now it seems he is to busy to return calls. I booked based on both him and his father doing this rescue under 500 miles from their new home just outside of Nashville.  Tyler said he will call me. Two months latter still nothing.

I canceled my patron membership with them. It was a requirement to be a member of 25 or higher in order to get work done. I even planned to tow this bus to their place if needed.

 I have now shifted to plan B. And take it a place where the person has all the tools and Years of experience.

I think the YouTube has gone to their heads now.  I understand they charge $120 per hour is what one person told me.
 They make over 100k on youtube plus patreon. They do quite well. Then the cherry on top is the direct marketing they are now doing.

 I love vintage buses but, right now it seems we have been taken advantage of.

We needed the help and got promised  things that never happened.  They could not even uphold the membership benifits.

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Grease Monkey
« Reply #129 on: May 26, 2021, 06:21:01 AM »
Selling membership like Costco and Sams Club ? what's next
Life is short drink the good wine first

Offline dtcerrato

  • Hero Member
  • *****
  • Posts: 2337
Re: Grease Monkey
« Reply #130 on: May 26, 2021, 06:43:05 AM »
Growing pains IMHO
Dan & Sandy
North Central Florida
PD4104-129 since 1979
Toads: 2009 Jeep GC Limited 4X4 5.7L Hemi
             2008 GMC Envoy SLT 4x4 4.2L IL Vortec

Offline richard5933

  • Hero Member
  • *****
  • Posts: 3982
Re: Grease Monkey
« Reply #131 on: May 26, 2021, 07:56:34 AM »
When compared to nearly any mainstream RV repair shop, he's still heads and shoulders above.
Richard
1974 GMC P8M4108a-125 Custom Coach "Land Cruiser" (Sold)
1964 GM PD4106-2412 (Former Bus)
1994 Airstream Excella 25-ft w/ 1999 Suburban 2500
Located in beautiful Wisconsin

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Grease Monkey
« Reply #132 on: May 26, 2021, 08:50:45 AM »
The poster is pissed about a different deal that cost
 him,
Life is short drink the good wine first

Offline Fred Mc

  • Hero Member
  • *****
  • Posts: 843
Re: Grease Monkey
« Reply #133 on: May 26, 2021, 09:15:00 PM »
 "think the YouTube has gone to their heads now.  I understand they charge $120 per hour is what one person told me.
 They make over 100k on youtube plus patreon. They do quite well. Then the cherry on top is the direct marketing they are now doing."

Don't most shops charge 120 per hour?And most of them have NO experience with DD 2 strokes.
I just watched his latest   U-tube video for free. The ONLY ad I saw on there was a U-tube ad( like you now see at the beginning and  partway thru the videos). Can't imagine they make ANY money from that.As for paying for Patreon its not like taxes.You can stop anytime you want.

Offline windtrader

  • Hero Member
  • *****
  • Posts: 2528
Re: Grease Monkey
« Reply #134 on: May 26, 2021, 10:38:42 PM »
Hey - this is America - where anyone can grab onto an idea and make as much of it as possible. It is the dream that still burns in many around the world that America is the place to come and maximize their potential, grit, perseverance, and belief that one can make as much of oneself as possible. Still the greatest country in the world.


Honestly, it feels like some here are jealous about his humble, know nothing beginnings then seeing him take advantage of opportunities to make money and provide the bus nut world another source of advise, knowledge, confidence, and support to join the club.


All that said, I'ver never been a BGM fan but do admire how he's leveraged the digialt and social media to his benefit. Go Scott and anyone else who jumps on!
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal