Author Topic: Looking for a parts bus  (Read 3684 times)

Offline David Anderson

  • Hero Member
  • *****
  • Posts: 1308
  • just outside San Antonio TX
Looking for a parts bus
« on: October 24, 2020, 05:40:21 PM »
 Seems like a wise thing, maybe :P

Anyway the 1984 Eagle on the BCM classifieds for $6k in Rossville GA.  Anyone know anything about it?  Not much description and it is missing some parts (back wheel) and no wipers. 

For $6k if I could get it home I would have plenty of parts.

David

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Looking for a parts bus
« Reply #1 on: October 25, 2020, 07:26:57 AM »
David 6k is way to much to pay for a parts bus,you pay scrap prices 1k to 2 k and sometimes you lose money on those
Life is short drink the good wine first

Offline chessie4905

  • Hero Member
  • *****
  • Posts: 7149
Re: Looking for a parts bus
« Reply #2 on: October 25, 2020, 11:22:45 AM »
add that up and maybe you should start toying with the idea of selling yours and move up to a newer conversion, especially as the prices are dropping.
GMC h8h 649#028 (4905)
Pennsylvania-central

Offline David Anderson

  • Hero Member
  • *****
  • Posts: 1308
  • just outside San Antonio TX
Re: Looking for a parts bus
« Reply #3 on: October 25, 2020, 12:13:33 PM »
add that up and maybe you should start toying with the idea of selling yours and move up to a newer conversion, especially as the prices are dropping.
I would hate to part with mine.  It has been so reliable for 20 years, and I know it so well that it's almost a body extension of me :o
I am just concerned that Eagle parts are getting a bit hard to locate.

David

Offline luvrbus

  • Hero Member
  • *****
  • Posts: 26570
Re: Looking for a parts bus
« Reply #4 on: October 25, 2020, 12:21:27 PM »
I would hate to part with mine.  It has been so reliable for 20 years, and I know it so well that it's almost a body extension of me :o
I am just concerned that Eagle parts are getting a bit hard to locate.

David


Eagle parts are not hard to find yet they will be around for a long time,and Eagle used a lot of off the shelf parts too
Life is short drink the good wine first

Offline 6805eagleguy

  • Sr. Member
  • ****
  • Posts: 391
  • Have you ever seen a sad person rolling coal?
Re: Looking for a parts bus
« Reply #5 on: October 25, 2020, 02:58:03 PM »
I wouldn’t shell out 6 grand on a parts bus quite yet... I’m sure there’s plenty to be had cheaper than that.
1968 Eagle model 05
Series 60 and b500 functioning mid 2020

Located in sunny McCook Nebraska

https://eagles-international.net/forums/viewtopic.php?t=4786&sid=12ebf0fa56a6cbcf3bbaf1886a030a4e

Offline chessie4905

  • Hero Member
  • *****
  • Posts: 7149
Re: Looking for a parts bus
« Reply #6 on: October 25, 2020, 03:33:19 PM »
what about torsilastics and drop boxes, marker lenses...just that value of yours and how much you get ibto one for parts, including shipping, starts adding up. Even Cliff moved on albeit to the darker side. lol As you age, that work takes more time and more tiring and life gets shorter.
GMC h8h 649#028 (4905)
Pennsylvania-central

Offline David Anderson

  • Hero Member
  • *****
  • Posts: 1308
  • just outside San Antonio TX
Re: Looking for a parts bus
« Reply #7 on: October 26, 2020, 05:00:51 PM »
I wouldn’t shell out 6 grand on a parts bus quite yet... I’m sure there’s plenty to be had cheaper than that.
If you find one, let me know. :^

Thanks,
David

Offline DoubleEagle

  • Hero Member
  • *****
  • Posts: 1902
  • BCM Subscriber
Re: Looking for a parts bus
« Reply #8 on: October 27, 2020, 07:56:12 PM »
I found one through an online auction that I got for $1100. Someone had previously bought it, but backed out because they could not start it. I estimated that the parts I saw in pictures easily justified the $1100, like the bumper corners, torsilastics, etc. It would not start because the battery cables were severely corroded. I replaced those, primed the fuel, and got it going. I drove it home because I am too cheap to do any towing. It turned out that the engine is in pretty good shape. Do searches of online auctions, craigslist, etc. Maybe even Facebook Marketplace (if you are desperate), but start low and only go up when you see something of value. With today's scrap prices, $6000 would be crazy.
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, HT746

Offline rusty

  • Hero Member
  • *****
  • Posts: 557
Re: Looking for a parts bus
« Reply #9 on: October 28, 2020, 07:18:44 AM »
Walter or anyone parting out an Eagle. If it has a clutch I am interested in both cylinders in the air clutch assist . Correction one slave cylinder and one control valve.
Wayne
3035910372

Offline 6805eagleguy

  • Sr. Member
  • ****
  • Posts: 391
  • Have you ever seen a sad person rolling coal?
Re: Looking for a parts bus
« Reply #10 on: October 28, 2020, 10:37:37 AM »
Wayne I might still have mine I’ll have to check
1968 Eagle model 05
Series 60 and b500 functioning mid 2020

Located in sunny McCook Nebraska

https://eagles-international.net/forums/viewtopic.php?t=4786&sid=12ebf0fa56a6cbcf3bbaf1886a030a4e

Offline rusty

  • Hero Member
  • *****
  • Posts: 557
Re: Looking for a parts bus
« Reply #11 on: October 28, 2020, 11:19:52 AM »
Thank you Mason. Walter is looking to. I will take both of them if you guys have them.

Offline Busted Knuckle

  • Hero Member
  • *****
  • Posts: 6723
  • 6 Setras, 2 MCIs, and 1 Dina. Just buses ;D
    • KY Lakeside Travel ... Just 4 the Fun of it!
Re: Looking for a parts bus
« Reply #12 on: October 31, 2020, 02:07:09 PM »
That bus at Rossville, GA is at the former Choo-Choo garage and trust me Joel knows how much work is required to make any $ scrapping any bus, but yes they have scrapped Eagles in the past.
I'd say you can probably get it for a third or less!
;D  BK  ;D
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

Offline RJ

  • Vantaré Conversion "Miss Vivian"
  • Hero Member
  • *****
  • Posts: 3944
Re: Looking for a parts bus
« Reply #13 on: November 03, 2020, 09:13:14 PM »
That bus at Rossville, GA is at the former Choo-Choo garage. . .

Bryce -

When did Joel close Choo-Choo?

RJ
1992 Prevost XL Vantaré Conversion M1001907 8V92T/HT-755 (DDEC/ATEC)
2003 VW Jetta TDI Sportwagon "Towed"
Cheney WA (when home)

Offline Busted Knuckle

  • Hero Member
  • *****
  • Posts: 6723
  • 6 Setras, 2 MCIs, and 1 Dina. Just buses ;D
    • KY Lakeside Travel ... Just 4 the Fun of it!
Re: Looking for a parts bus
« Reply #14 on: November 05, 2020, 05:27:20 PM »
I'm not sure but I do know they were having trouble with the land owner a few yrs back.
As I understood it Mr. Bowen sold the surrounding land with a clause that he was able to keep and run Choo-Choo as long as he wished/was able. But I know a few yrs back he had some serious health problems and the land owner was making them clean up all the non-running buses from the property. Jay McKinight had contacted me for help in getting a couple of his buses moved from there to an inside storage warehouse he'd acquired. I hadn't heard anything since then. But my guess is that Mr. Bowen has passed and the living estate lease has expired, but that is only a guess! (unless Mr. Bowen found a way to keep it open and running for Joel's benefit)
Like I said I'm not sure what's going on down there as I hadn't talked to anyone from there for sometime!
;D  BK  ;D
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal